PRESS BRAKES

Press brakes are used to bend metals. It has lower and upper molds that perform the twisting process. Upper molds (male mold) and lower molds (female mold) are in the form of "V" and the male mold must fit exactly into the female mold. The sheet metal between the two molds is bent with a great force according to programmed shape.

HYDRAULIC PRESS BRAKES

Hydraulic press brakes work with two synchronized hydraulic cylinders in C frames that move the upper beam. Our products are efficient, safe and easy to use.

STANDARD FEATURES

✔ Steel Construction
✔ Standart upper and lower molds
✔ NC Digital controller which can be programmed in units of stroke and backgauge axes
✔ Foot Pedal
✔ Front support arms
✔ Double Speed?? Operation system
✔ Pressure Switch
✔ Lighting
✔ Rams,connecting parts such as cast steel in load

OPTIONAL FEATURES

✔ CE Conformity
✔ Partially hardened upper and lower dies
✔ Promecam Connection System
✔ Special Bending Molds
✔ Rear Seat Storage
✔ Non-standard throat depth

PRESS BRAKES | TECHNICAL DETAILS

The technical details of the produced Press Brakes are listed.

TYPES HPB-4x1300 HPB-4x2500 HPB-6x2500 HPB-4x3100 HPB-6x3100 HPB-4x4100 HPB-8x3100 HPB-8x4100 HPB-10x3100 HPB-10x4100 HPB-12x3100 HPB-12x4100
Bending Force / Ton: 30 60 90 90 120 120 160 200 200 250 250 300
Bend.Material Thick / mm: 4 4 6 4 6 4 8 8 10 10 12 12
Bending Lenght / a mm: 1300 2500 2500 3100 3100 4100 3100 4100 3100 4100 3100 4100
Housing Height / b mm: 390 400 430 430 430 430 430 480 480 500 500 560
Housing Depth / c mm: 350 240 250 250 250 270 270 270 270 330 330 350
Stroke / d mm: 125 160 160 160 160 160 160 200 200 220 220 250
Front Mounting Holes / e mm: 1150 2200 2210 2710 2730 3730 2740 3750 2750 3790 2790 3800
Side Mounting Holes / f mm : 800 770 820 820 835 835 900 990 990 1110 1110 1150
Hosuing Width / g mm : 1045 2030 2030 2530 2530 3530 2530 3530 2530 3530 2530 3530
Machine Height / h mm : 2000 2220 2400 2400 2400 2400 2500 2600 2600 2700 2700 2800
Machine Depth / i mm : 1250 1200 1300 1300 1350 1350 1450 1600 1600 1700 1700 1800
Machine Width / j mm : 1400 2600 2600 4200 3200 4200 3200 4200 3200 4200 3200 4200
Approach Speed / mm/sec: 80 80 80 80 80 80 80 80 80 80 80 80
Bending Speed / mm /sec: 10 10 10 10 8 8 8 7 7 9 9 7
Returm Speed / mm/sec: 70 70 80 80 72 72 72 78 78 57 57 50
Motor Power / kW: 4 5,5 7,5 7,5 11 11 11 15 15 22 22 22
Weight / kg: 2000 4800 5000 5900 7100 9000 8500 12000 10000 13000 11000 14500
*The actual packaging rate depends on the physical shape of the product, its mass and the film properties used.

PRESS BRAKES | PHOTOS

All pictures and photos shown are for illustration purpose only. Actual products may vary due to product enhancements.

For more information about our Press Brakes , please contact Hymec Press.

Tell us about your requirements

Tell us all the details about your inquiry.

TOP